Note that in this example we are assuming that the PLC output card is plugged into module 2 (O: 2). Note that you are missing 7 FLOAT elements, 3 for inputs (F8:1.

You must have, at least, as many elements as the ones defined in Factory I/O. Once a new project is created, one BINARY, OUTPUT, and FLOAT elements are already defined. Hover the mouse cursor over a grayed-out point to get relevant information about the error. When connected to a PLC, non-existent tags or tags with an error are grayed out. Now, click on CONNECT to connect to the PLC.Ī successful connection is indicated by a green icon next to the selected driver, as well as next to the driver's name displayed on the status bar. Press Esc to return to the Driver Window. For Float and Integer points, Count represents the number of elements (Word).This means that if you would need 32 bits for Bool Inputs you would have to define, at least, 2 elements (Word) in the corresponding data file. For Bool Inputs/Outputs, Count represents the number of bits.Note that you can use any data file for Bool, Float and Integer but the following rules apply: B3:0/0) must be associated with an element of the PLC data file. On this panel you can also define how many I/O Points to use, as well as what part of the controller's memory (tags) they reference.Įach I/O point (e.g. Insert the controller's IP address into the Host field. Open the driver Configuration Panel by clicking on CONFIGURATION. Select Allen-Bradley SLC 5/05 from the driver drop-down list. In Factory I/O click on FILE > Driver Configuration to open the Driver Window. You should now be able to find the controller under the newly added driver. Start RSLinx and open the driver configuration dialog by selecting Communications > Configure Drivers from the menu.Ĭlick on Add New and enter the PLC IP address in the Host Name field. Which describes methods to assign an IP address to the controller.īy default, the controller is BOOTP enabled and will be assigned an IP address by a BOOTP server on the network. SLC 500 Modular Hardware Style User Manual, To complete this step you should refer to the

Manual rslogix 500